
High quality refillable luxury acrylic cosmetic jars double wall face cream plastic jar
-
$0.78≥5000 Piece/Pieces
- Min. Order:
- 5000 Piece/Pieces
- Min. Order:
- 5000 Piece/Pieces
- Transportation:
- Ocean, Land, Air, Express, Others
- Port:
- NINGBO, SHANGHAI
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Payment Type: | T/T |
---|---|
Incoterm: | FOB,CIF,EXW |
Transportation: | Ocean,Land,Air,Express,Others |
Port: | NINGBO,SHANGHAI |
Product Description
Product Description
Product Description






Specification
item
|
value
|
Base Material
|
Acrylic
|
Collar Material
|
Acrylic
|
Use
|
Skin Care Cream
|
Cap Material
|
Acrylic
|
Place of Origin
|
China
|
|
Zhejiang
|
|
|
Plastic Type
|
Acrylic
|
Usage
|
Cosmetic Packing
|
Different Decoration
Different decoration can be provide for the containers to make it colorful.
Such as embossed,spraying coating,UV-coating, hot stamping,silk screen printing
Different decoration can be provide for the containers to make it colorful.
Such as embossed,spraying coating,UV-coating, hot stamping,silk screen printing

Packing & Delivery
Each part are packed in a PE/EPE foam/bubble bag ,then into a big dust-free bag,outer is five-layer carton,strong enough to resisit long-distrance transportation.

Quality Control

With strictly quality control system,we are sure that our products can pass international AQL quality control test.
1.leakage test:
With colored water, at a temperature of 45 ℃ pressure of 0.55MPa, pumping for 2 minutes, holding pressure for 3 minutes without
leakage phenomenon.
2.Compliance test:
In the case of qualified sealing performance, the product is required to cooperate in place, no sliding teeth phenomenon, while
the gap is consistent and the gap in the 0.5mm-2mm.
3.Printing adhesion test:
in the same printing parts, with 3M810 tape or ordinary packaging tape was 45 ° continuous instant stripping 3 times, requiring
the printing site without ink off.
4.Spraying performance:
in the jar/bottle blade grid, and then 3M810 tape or ordinary packaging tape was 45 ° continuous instantaneous stripping 1 times,
requiring cross-section ≤ 2% off.
1.leakage test:
With colored water, at a temperature of 45 ℃ pressure of 0.55MPa, pumping for 2 minutes, holding pressure for 3 minutes without
leakage phenomenon.
2.Compliance test:
In the case of qualified sealing performance, the product is required to cooperate in place, no sliding teeth phenomenon, while
the gap is consistent and the gap in the 0.5mm-2mm.
3.Printing adhesion test:
in the same printing parts, with 3M810 tape or ordinary packaging tape was 45 ° continuous instant stripping 3 times, requiring
the printing site without ink off.
4.Spraying performance:
in the jar/bottle blade grid, and then 3M810 tape or ordinary packaging tape was 45 ° continuous instantaneous stripping 1 times,
requiring cross-section ≤ 2% off.
Related Keywords
Related Keywords
You May Also Like
You May Also Like