Automatic Outer Ring Typing Device

A semi-automatic typing device for the outer ring of a bearing, including a base, the base is provided with a panel, the panel is provided with an organic base, the top of the base is provided with a thread clamp base, the thread clamp base is matched with an adjusting screw, the base is fixedly provided with a cylinder mounting frame at the bottom of the adjusting screw, the cylinder mounting frame is provided with a thread base, which is threaded with the adjusting screw through the thread base, and the cylinder mounting frame is provided with a cylinder, The telescopic rod of the cylinder is provided with a thimble clamp, the thimble clamp is provided with a thimble, and the panel is provided with a positioning tool at the position directly below the thimble, and the outer ring of the bearing is positioned and processed through the positioning tool The beneficial effect of the utility model is that: by setting a base on the panel, and setting an air cylinder mounting frame in the base, the air cylinder mounting frame is connected with the adjusting screw thread, so that the air cylinder mounting frame can carry out height fine adjustment, so as to improve the typing accuracy control.

1. Workpiece diameter: maximum diameter φ 100mm, minimum diameter φ 10MM。
2. The marking stroke of piston rod is 100mm.
3. Hydraulic system pressure: 5.5-7mpa.
4. Workpiece pressure: 3.5-4.0mpa.
5. Rated power of oil pump motor: 3.75kw rated voltage: AC380V.
6. The single production cycle is about 1-1.2 seconds.