Laser Drill Dust Catcher Combo

• HT2015217 is combined by a laser level and a drill dust catcher.It provides two main functions:1.A convenient working condition of marking a line/point by laser;2.Collecting dust during process of driling holes.
• HT2015217 is pressed against the wall and switched on.A battery-powered pump generates avacuum which causes the dvice to stick to all types of normal indoor surfaces.Both hands then will be free for the job in hand.
• Once the job is finished,the device can  be released from the wall by pressing the vent button.
• One device gives 2 important functions-position in desired spot and keep the working environmoent dean.
  1.Line up:Posiytioning the unit with correct direction of laser line,switching on the unit to stick the unit onto the wall.Switch on laser,the user could mark the locations where to drill the holes through the laser line.
  2.Detach:After finishing the mark,switch off the pump,then press the vent button to release the vacuum and take away the unit from the surface.
  3.Drill:Rotating the unit to the drill dust catcher function and start the vacuum stick function again to stay on wall.Drilling with.HT2015217 which sticks firmly to the wall and the user’s both hands are free for drilling.Detach:After dirlling each hole,repeat the step 2 to take then re-locate the unit if need HT2015217 off from the wall.
  4.Empty:Open the dust collector part of HT2015217 and empty the dust into a suitable container.No cleaning up necessary.
  5.Hanging cover:The cover could be hanged on the wall.The user could put the unit on cover after usage.